Toshiba MJ-1027 Service Manual page 95

1. Receiving Sheets
The stitcher unit receives sheets from the finisher unit and outputs them inside the vertical path
in vertical orientation.
The vertical path, while sheets are being output, is configured by two paper deflecting plates.
The position of the sheets being output is set by the paper positioning plate so that the center of
the stack matches the stapling/folding position.
Sheets coming later are output closer to the delivery slot.
CHAPTER 3 SADDLE STITCHER UNIT BASIC OPERATION
Direction of
delivery
Second sheet
Figure 3-202
First sheet
Paper positioning plate
3-9