Toshiba MJ-1027 Service Manual page 136

CHAPTER 4 MECHANICAL CONSTRUCTION
6) Disconnect the connector [1] and remove 4
screws [2] to take off the tray-1 and -2 lift
motor [3].
9. Removing the Grate-Shaped
Upper Guide
1) Remove the slide guide [1] and end caps
[2].
2) Release the tray lift motor gear clutch [6]
with a screwdriver or similar object while
supporting the tray assembly, and gently
lower the tray assembly down to its lowest
position.
3) Remove the five screws [3] (M4).
4) Remove the screw [4] (M3), and remove
the grate-shaped upper guide [5].
4-6
Figure 4-113
[2]
[3]
[4]
[6]
Figure 4-114
[1]
[2] [3]
[2]
[5] [1]
[3]