Feeding System - Toshiba MJ-1027 Service Manual

B.

FEEDING SYSTEM

1. Removing the Swing Unit
1) Remove the tray assembly (see I-A-5).
2) Remove the grate-shaped upper guide (see
I-A-6).
3) Remove the grate-shaped lower guide (see
I-A-7).
4) Remove the harness from the two harness
stops [1], and disconnect the four connec-
tors [2].
5) Remove the screw [3], and remove the sta-
pler stay holder [4].
6) Remove the three screws [5], and slide out
the swing unit [6] towards you.
7) Remove the claws of the two knurled belt
holders (front [7a], rear [7b]) and remove
the swing unit.
CHAPTER 4 MECHANICAL CONSTRUCTION
[1]
[2]
Figure 4-119
[5]
[5]
Figure 4-120
Figure 4-121a
[4]
[3]
[6]
[5]
[7a]
4-9