Fujitsu ETERNUS CS800 S6 User Manual page 226

Targets
Use the Targets page to view the current target (Fibre Channel) configuration.
To access the Targets page, on the Host Access page, click the Targets tab (see
Page" on page
Figure 160: Targets Page
The Targets page displays the Target Port and WWPN for the currently configured targets.
The Backpanel Locations section displays a graphical representation of the Fibre Channel
and Ethernet ports as they appear on the rear of the system.
A mapped (green) status indicates the host is currently logged on to one or
more Fibre Channel target ports.
Select one or more targets and click Reset Target(s) to initiate a Fibre Channel reset on
the selected ports. A reset causes the ports to go through LIP (Loop Initialization
Protocol).
Target Usage
Use the Target Usage page to view current target and device mappings for the ETERNUS
CS800.
To access the Target Usage page, on the Host Access page, click the Target Usage tab (see
"Target Usage Page" on page
ETERNUS CS800
226).
227).
10.3 VTL Configuration
"Targets
226