Fujitsu ETERNUS CS800 S6 User Manual page 454

Figure 322: Label positions of the ETERNUS JX40 S2 / DX100 S3 modules
Also affix a label to both ends of the power cables.
2. If you decided to switch off the system while working on its hardware (recommended,
see above), perform shutdown via the ETERNUS CS8000 S6 remote management pages
(see "Reboot & Shutdown" on page
Shutting down the system can take up to 15 minutes. The server goes into standby
mode, its power-off indicator lights up green.
3. If necessary, rearrange the existing components in the rack and/or mount the new
storage module(s). See section
"Installing a Storage Module in the Rack" on page
CAUTION!
If you have to unmount or to relocate the existing modules ensure not to change
their order. Double check the labels, see step 1.
4. If necessary, prepare or enhance the SAS cabling as shown by
Entry SAS cabling with up to three JX40 S2 enclosures" on page
ETERNUS CS800
A label sheet was provided together with the original ETERNUS CS800 S6
delivery.
430.)
"Locating the Mounting Position" on page 77
84.
17.1 Storage Expansion - Entry
and
figure"ETERNUS CS800 S6
455.
454