Fujitsu ETERNUS CS800 S6 User Manual page 248

You must add target IP mapping information if you are performing optimized
duplication on a segmented network and replication is not configured between
the source ETERNUS CS800 and target ETERNUS CS800.
Fujitsu Technology Solutions does not recommend mapping multiple data IP
addresses to a single replication IP address. If you have mapped multiple data
IP addresses and the routing is not working, try removing the additional data IP
addresses, and map only a single data IP address.
To access the Target IP Mapping page, on the OST page, click the Target IP Mapping tab
(see "Target IP Mapping Page" on page
Figure 172: Target IP Mapping Page
Tasks
Use the Target IP Mapping page to perform the following tasks:
View information about mapped data and replication IP addresses (see
l
Mapping List" on page
Map a target data IP address to a replication IP address (see
l
Address" on page
Edit the mapping for a target data IP address (see
l
page
Delete the mapping for a target data IP address (see
l
page
ETERNUS CS800
249).
249).
249).
249).
248).
"Editing a Mapped IP Address" on
"Editing a Mapped IP Address" on
10.4 OST Configuration
"Target IP
"Mapping a Target IP
248