Fujitsu ETERNUS CS800 S6 User Manual page 282

IP Address
Name
3. Select one or more traps to send to the destination:
Failure
Warning
Informational
Available
Unavailable
4. Click Apply.
Editing a Destination
Edit an SNMP destination to change the name of the destination or the types of traps the
ETERNUS CS800 sends to the destination.
To edit a destination:
1. Select SNMP destination and click Edit.
The Edit Trap Destination page displays (see
283).
ETERNUS CS800
Enter the IP address of the system that will receive
the traps generated by the ETERNUS CS800.
Additional Information
When entering IP addresses, never use an address
l
that is in a reserved IP address range. To see a
list of reserved IP address ranges, click the quick
tip icon [?] located near the IP address field.
To use hostname format, you must specify at
l
least one DNS IP address on the Network page
(see "Network" on page
Enter the name of the destination.
Sends failure traps.
Sends warning traps.
Sends informational traps.
Sends a trap when the system transitions from an
unavailable to an available state.
Sends a trap when the system transitions from an
available to an unavailable state.
"Edit Trap Destination Page" on page
10.8 Notifications
293).
282