Eternus Dx100 S3 Base Module - Rear View - Fujitsu ETERNUS CS800 S6 User Manual

LED name
POWER
IDENTIFY
FAULT
MAINTENANCE green
CACHE
READY
Table 12: Status and Meanings of Each LED (Operation Panel - Base Module)
For detailed information on ETERNUS DX100 S3 storage module see
storage module manuals.
3.2.4

ETERNUS DX100 S3 Base Module - Rear View

This chapter describes the rear view of ETERNUS DX100 S3 base module, which includes
connectors and indicators.
Figure 36: Rear view of DX100 S3 controller enclosure
ETERNUS CS800
LED status Description
green DC power is supplied to the controller enclosure.
blue blinking The installation location of the controller enclosure is
identified according to the instruction that is issued from
ETERNUS Web GUI or ETERNUS CLI.
amber The system is in error status.
blinks amber A part of the ETERNUS DX requires preventive
maintenance.
Maintenance for the ETERNUS DX is in progress.
blinks green Maintenance or a status check via ETERNUS Web GUI or
ETERNUS CLI is necessary.
green There is data in the cache memory of the ETERNUS DX.
green The ETERNUS DX is available for use..
3.2 Storage Modules
ETERNUS DX100 S3
62