Fujitsu ETERNUS CS800 S6 User Manual page 417

To access the Storage Array Diag File page, on the Diagnostics page, click the Storage
Array Diag File tab (see
Figure 291: Storage Array Diag File Page
To generate and download a system diagnostics file:
1. Click Generate New to generate a new storage array diagnostics file.
The system generates a new diagnostics file. This can take several minutes.
2. After the file finishes generating, click the link to enable the Download Current button.
3. To download the generated diagnostics file, click Download Current.
A dialog box displays asking if you want to open or save the file.
4. Click Save or OK to download the file.
Healthchecks
The Healthchecks page allows you to perform tests that verify the health and integrity of
the data deduplication blockpool. You can also enable and disable healthchecks.
To configure the ETERNUS CS800 to automatically run the healthchecks at
specified intervals, use the Configuration > Scheduler page (see
Healthchecks" on page
To access the Healthchecks page, on the Diagnostics page, click the Healthchecks tab.
The Healthchecks page contains the following tabs:
"General" on page 417
l
"Status" on page 418
l
General
The General page allows you to start running the healthchecks or stop them if they are
already running. When you start the healthchecks, only the healthchecks that are currently
enabled are run (see
ETERNUS CS800
"Storage Array Diag File Page" on page
268).
"Diagnostics" on page
417).
415).
14.2 Diagnostics
"Scheduling
417