Problems Resolved In Xcp 2070 - Fujitsu M10 Product Notes

Table 3-16 Problems resolved in XCP 2080 (continued)
SPARC M10-
RTI No. 1 4 4S
RTIF2- x x x
131126-006

Problems resolved in XCP 2070

The following table lists the problems resolved in XCP 2070.
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2240 ･ March 2015
128
Description
Suppose that the input power is turned off
and on, or that the XSCF is reset. If an
operation related to CPU core activation is
performed for the first time using XSCF
Web rather than the XSCF shell, it may fail.
The procedure that fails is any of the
following.
1. Perform any of the following on XSCF
Web.
- From the [Settings] - [CoD Activation]
menu, add the CPU core activation key.
- From the [Maintenance] - [Configuration
Management] menu, save the XSCF
setting information.
- From the [Maintenance] - [Configuration
Management] menu, save/restore the CPU
core activation key.
2. Execute the deletecodactivation(8) or
setcod(8) command on the XSCF shell.
Alternatively, delete the CPU core
activation key on XSCF Web.
Alternatively, change the assignment of
the CPU core activation on XSCF Web.
Alternatively,
1. Perform any of the following on XSCF
Web.
- From the [Settings] - [CoD Activation]
menu, delete the CPU core activation key.
- From the [Settings] - [CoD Reservation]
menu, release the assignment of the CPU
core activation.
2. Log in to the XSCF shell or XSCF Web
with another user account.
3. Execute the deletecodactivation(8) or
setcod(8) command on the XSCF shell.
Alternatively, delete the CPU core
activation key on XSCF Web.
Alternatively, change the assignment of
the CPU core activation on XSCF Web.
Workaround
To perform an operation related to the
CPU core activation for the first time
after the input power is turned off and on
or after the XSCF is reset, execute it on
the XSCF shell.
[How to restore]
Execute the rebootxscf(8) command to
reset the XSCF. Then, execute the
deletecodactivation(8) or setcod(8)
command on the XSCF shell.