Fujitsu M10 Product Notes page 69

Table 3-5 Problems that might occur with XCP 2240 and workarounds (continued)
SPARC M10-
RTI No. 1 4 4S
RTIF2- x x x
140304-002
RTIF2- x x x
140304-003
Description
The "SCF process down detected" error
log may be registered when the
flashupdate(8) command is running.
In case of SNMPv3, if the trap host name
registered by the setsnmp(8) command
contains a colon (:), it does not show up
properly by the showsnmp(8) command.
[Example]
In case the trap host name is "test:
example.com" , the host name is shown
as "test" and port number is shown as "0".
Workaround
There is no effective workaround.
[When restoration is not required]
If both of the following conditions are
met, there is no need for restoration. It
may be assumed that firmware update
has completed properly.
- The "showlogs error -rv" command
reveals that the following diagnostic
message along with the "Msg: SCF
process down detected" error message
had been registered when the
flashupdate(8) command was running.
[Example]
Diagnostic Code: 00000000
00000000 0000 00000000
00000000 0000 00000000
00000000 0000 666c6173
68757064 6174652e xxxxxxxx
00000000 00000000 0000
where, xxxxxxxx is indefinite
- The "showlogs event" command
displays the "XCP update has been
completed" event log.
[How to restore]
Re-execute the flashupdate(8) command.
In case of SNMPv3, do not register a trap
host name with the setsnmp(8)
command, that contains a colon (:).
If such a trap host name has already been
registered, use the following command to
remove the trap host name:
setsnmp remv3traphost -u 'username' -p
'port_nunber' trap_host_name
In such a case, be sure to specify a port
number. If the port number is not
specified when removing a trap host
name that includes a colon(:), the "Entry
does not exist" message is displayed and
the trap host name is not removed. The
port number specified at the time of
removal should be the one, which is not
wrongly displayed by the showsnmp(8)
command, but the one specified at the
time of registration.
Chapter 3 Information on Software 55