Example Of The "Master Parameters" Dialog Box - Siemens SIMATIC S5 Manual

Starting COM ET 200 Windows
Entering master
parameters
7-10
To enter the parameters for the master:
1. In the application window, double-click on the icon for the programmable
controller.
Result: The "Master parameters" dialog box is opened.
Station number:
Station type:
Station designation:
Host:
Addressing:
Number of the IM 308-C:
Multiprocessor mode:
Defaults
Error-reporting mode:
Response monitoring for slaves
Figure 7-8

Example of the "Master parameters" dialog box

2. Select the values as shown above and press the "OK" button to confirm.
Result: The master parameters you entered are saved and you are
returned to the application window.
Master parameters
1
IM 308-C
Master for pump 1
Host system <1>
Linear
0
QVZ
ET 200 Distributed I/O System
OK
Cancel
Help
Res ...
EWA 4NEB 780 6000-02a