Saving The Configuration Parameterized With Com Et 200 Windows - Siemens SIMATIC S5 Manual

Parameterizing, saving and documenting the configuration with COM ET 200 Windows
8.4 Saving the configuration parameterized with
COM ET 200 Windows
Options for saving
8-24
You have several options for saving the configuration parameterized with
COM ET 200 Windows.
Table 8-7 Saving the configuration parameterized with COM ET 200 Windows
If you ...
save the entire configuration File
export the configuration of a
master system to the
memory card for the IM
308-C,
export the configuration of a
master system to the S5-95U
with DP master interface,
after exporting the
configuration for a master
system to memory card, you
want to save the data on the
PG/PC as well
Note
If you have more than one master system and export only one master system
to memory card/32 K EEPROM or a binary file, the data exported does not
correspond to the entire configuration.
COM ET 200 Windows exports the data of only one master system to a
memory card or to the S5-95U (32 K EEPROM) or to a binary file.
If you want to reconstruct the entire configuration in a program file, you
must re-import all the associated binary files or the contents of all memory
cards/32 K EEPROMs (in the S5-95U).
use the commands ...
Save COM ET 200 Windows
saves the entire bus
or
configuration in a program
File Save file as ...
file.
File Export COM ET 200 Windows
Memory card exports only the
configuration of one master
system to memory card
File Export COM ET 200 Windows
DP master exports only the
configuration of one master
system to the S5-95U with
DP master interface
File Export COM ET 200 Windows
Binary file saves the configuration of
one master system in a
binary file having the
extension "*.2BF".
ET 200 Distributed I/O System
Meaning
EWA 4NEB 780 6000-02a