5.3.3
Connecting bus cable to bus connectors with order number 6ES7
972-0B.20 ...
Preparing the bus
To connect the bus cable to a bus connector with order number
cable
6ES7 972-0B.20 ..., proceed as follows:
1. Strip the ends of the cable conductors as shown in Fig. 5-13.
Figure 5-13 Stripping the cable for connection to bus connector (6ES7 972-0B.20 ...)
2. Open the housing of the bus connector by slackening the housing screw
3. Release the cover of the latching element.
ET 200 Distributed I/O System
EWA 4NEB 780 6000-02a
Routing cables; connecting and installing bus connectors
Right-cable output
A B
A B
without PG connector
Offset cable output
A B
A B
without PG connector
and raising the hinged cover.
A B
A B
with PG
connector
A B
A B
with PG connector
5-23
5