Siemens SIMATIC S5 Manual page 235

General technical data
In this chapter
Not in this chapter
Goal
ET 200 Distributed I/O System
EWA 4NEB 780 6000-02a
This chapter contains the general technical data for the bus connectors and
the RS 485 repeaters with order numbers 6ES7 972-0AA00-0XA0 as
described in this manual.
Section
A.1 Electromagnetic compatibility
A.2 Transport and storage conditions
A.3 Mechanical and climatic conditions for operation
A.4 Insulation tests, protection class and degree of protection
The standards complied with by the above-mentioned components and the
values the components achieve in testing are listed in the general technical
data, along with the criteria for testing.
This chapter does not contain the general technical data relating to
the IM 308-C master interface,
the S5-95U with DP master interface
the PG interface
The IM 308-C is in compliance with the general technical data for the
S5-115U, S5-135U and S5-155U programmable controllers.
The general technical data for the S5-95U is in the system manual
S5-90U/S5-95U Programmable Controller. This information is applicable to
all versions of the S5-95U.
The PG interface is in compliance with the general technical data of the PG.
After reading this chapter, you will be familiar with the environmental
conditions in which the ET 200 can be used.
Topic
A
Page
A-2
A-3
A-4
A-6
A-1