Example Of The "Slave Parameters Et 200B" Dialog Box - Siemens SIMATIC S5 Manual

Entering slave To configure the ET 200B distributed I/O station:
parameters for
1. In the "Slaves" window, click on the icon for ET 200 and by holding
ET 200B
2. Select "3" and press the "OK" button to confirm.
Family: Station type:
B-16DO
ET 200C
B-16DO/2A
ET 200U
ET 200B B-8DI/8DO
B-32DO
ET 200M
B-24DI/8DO.2
SIMATIC
B-24DI/8DO
DRIVES
AS-I B-4AO
Designation:
Response monitoring:
Error-reporting mode:
None QVZ
Figure 7-9

Example of the "Slave parameters ET 200B" dialog box

3. Select "ET 200B" as the family and the ET 200B-16DO with order
Entering slave
To configure the ET 200U distributed I/O station:
parameters for
1. In the "Slaves" window, click on the symbol for ET 200 and by holding
ET 200U
2. Select the station number, e.g. "4" and press the "OK" button to confirm.
ET 200 Distributed I/O System
EWA 4NEB 780 6000-02a
down the left mouse button, drag it to the bottom of the bus.
Result: A selection list allowing you to choose the station number of the
slave is opened.
Result: The "Slave parameters" dialog box is opened.
Slave parameters
Order number:
DP 6ES7 132-0BH00-0XB0
DP 6ES7 132-0BH10-0XB0
DP 6ES7 133-0BH00-0XB0
DP 6ES7 132-0BL00-0XB0
6ES7 131–0BL00–0XB0
DP 6ES7 133-0BN10-0XB0
DP 6ES7 133-0BN00-0XB0
DP 6ES7 135-0HF00-0XB0
Station number:
FREEZE-able
PEU SYNC-able
number 6ES7 132-0BH00-0XB0 as the station type and enter the
designation. Press the "OK" button to confirm.
Result: The master system in the application window is extended
accordingly.
down the left mouse button, drag it to the bottom of the bus.
Result: A selection list for the slave station number is opened.
Result: The "Slave parameters" dialog box is opened.
Starting COM ET 200 Windows
Cancel
Configure...
Parameterize ...
Help
3
OK
7
7-11