Mitsubishi Electric MELSEC iQ-R Series User Manual page 151

CH1 Wave output digital value out-of-range address monitor
When the digital value of the output wave data is out of the range, the buffer memory address of the wave data with a value
out of the range can be checked.
Only in the wave output mode, a value is stored in this area. Otherwise, 0 is stored.
When the multiple wave data with a digital input value out of the setting range are detected, only the buffer memory address
of the wave data detected first is stored.
When the first detection of a digital value out of the range occurs in a wave output status other than During wave output stop,
the stored value is updated.
To reset this area, correct the wave data to a value within the available setting range. After that, turn on and off 'Error clear
request' (YF) or 'Operating condition setting request' (Y9) to reset this area.
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Wave output digital value out-of-range
address monitor
CH Wave output digital value out-of-range
address monitor (When the Q compatible mode
function is used)
CH1 Wave output warning address monitor
The buffer memory address of the wave data where a warning has occurred can be checked.
Only in the wave output mode, a value is stored in this area. Otherwise, 0 is stored.
When a warning has occurred in the multiple wave data, only the buffer memory address of the wave data where the warning
occurred first is stored.
When the first warning occurs in a wave output status other than During wave output stop, the stored value is updated.
To reset this area, correct the wave data to a value within the setting range. After that, turn on and off 'Alert output clear
request' (YE) or 'Operating condition setting request' (Y9) to reset this area.
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Wave output warning address monitor
CH Wave output warning address monitor
(When the Q compatible mode function is used)
CH1 CH2 CH3
440 640 840
441 641 841
1156 1158 1160
CH1 CH2 CH3
442 642 842
443 643 843
1172 1174 1176
CH4 CH5 CH6
1040 1240 1440
1041 1241 1441
1162 1164 1166
CH4 CH5 CH6
1042 1242 1442
1043 1243 1443
1178 1180 1182
Appendix 3 Buffer Memory
CH7 CH8
1640 1840
1641 1841
1168 1170
A
CH7 CH8
1642 1842
1643 1843
1184 1186
APPENDICES
149