Mitsubishi Electric MELSEC iQ-R Series User Manual page 155

CH1 Scaling enable/disable setting
Set whether to enable or disable the scaling.
For the scaling function, refer to the following.
Page 23 Scaling Function
Setting value
0
1
If a value other than the above is set, a scaling enable/disable setting range error (error code: 1A0H) occurs.
The scaling function cannot be used when the wave output function is used. In the channel for which Enable (0) is set while
the wave output function is being used, a scaling setting error in wave output mode (alarm code: 0B0H) occurs.
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Scaling enable/disable setting
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9) to enable the setting.
■Default value
The default value is Disable (1) for all channels.
Scaling enable/disable setting [Q compatible mode]
When the Q compatible mode function is used, set whether to enable or disable the scaling.
The following shows the setting details in the Q compatible mode.
b15 b14 b13 b12 b11 b10 b9
0 0 0 0 0 0 0
(2)
(1) 0: Scaling enabled, 1: Scaling disabled
(2) b4 to b15 of the R60DA4 and b8 to b15 of the R60DAV8 and R60DAI8 are fixed to 0.
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
Scaling enable/disable setting
CH1 CH2
502 702
b8 b7 b6 b5 b4 b3 b2
0 CH8 CH7 CH6 CH5 CH4 CH3 CH2
(1)
CH1 CH2
53
Description
Enable
Disable
CH3 CH4 CH5
902 1102 1302
b1 b0
CH1
CH3 CH4 CH5
CH6 CH7 CH8
1502 1702 1902
CH6 CH7 CH8
APPENDICES
Appendix 3 Buffer Memory
A
153