Mitsubishi Electric MELSEC iQ-R Series User Manual page 154

CH1 D/A conversion enable/disable setting
Set whether to enable or disable the D/A conversion.
For details on the D/A conversion enable/disable function, refer to the following.
Page 19 D/A Conversion Enable/Disable Function
Setting value
0
1
When a value other than the above is set, the value is processed as D/A conversion disable (1).
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH D/A conversion enable/disable setting
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9) to enable the setting.
■Default value
The default value is D/A conversion disable (1) for all channels.
D/A conversion enable/disable setting [Q compatible mode]
When the Q compatible mode function is used, set whether to enable or disable the D/A conversion.
The following shows the setting details in the Q compatible mode.
b15 b14 b13 b12 b11 b10 b9
0 0 0 0 0
(2)
(1) 0: D/A conversion enabled, 1: D/A conversion disabled
(2) b4 to b15 of the R60DA4 and b8 to b15 of the R60DAV8 and R60DAI8 are fixed to 0.
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
D/A conversion enable/disable setting
APPENDICES
152
Appendix 3 Buffer Memory
CH1
500
b8 b7 b6 b5 b4
0 0 0 CH8 CH7 CH6 CH5
CH1
0
Description
D/A conversion enable
D/A conversion disable
CH2 CH3 CH4
700 900 1100
b3 b2 b1 b0
CH4 CH3 CH2 CH1
(1)
CH2 CH3 CH4
CH5 CH6 CH7
1300 1500 1700
CH5 CH6 CH7
CH8
1900
CH8