Program example 1
The following figure shows an example of the program to start D/A conversion by setting the digital values for D/A conversion
(CH1 to CH4) and enabling analog output.
(32) Sets values in CH1 Digital value to CH4 Digital value.
(107) Enables output for CH1 to CH4.
(163) Disables output for CH1 to CH4 when any of the following signals is off.
• 'D/A output enable command signal' (X21)
• 'Module READY' (X1000)
• 'External power supply READY flag' (X1007)
Appendix 5 Operation Examples of When the Remote Head Module Is Mounted
A
APPENDICES
183