2
PARAMETER SETTING
Set the parameters of each channel.
Setting the parameters eliminates the need for programming them.
2.1
Basic Setting
Setting procedure
Open "Basic settig" of the engineering tool.
1.
Start Module parameter.
Navigation window [Parameter] [Module Information] Module name [Module parameter] [Basic settig]
2.
Double-click the item to be changed to enter the setting value.
• Item where a value is selected from the pull-down list
Click the [] button of the item to be set, and from the pull-down list that appears, select the value.
• Item where a value is entered into the text box
Double-click the item to be set to enter the numeric value.
2 PARAMETER SETTING
2.1 Basic Setting
2
95