Mitsubishi Electric MELSEC iQ-R Series User Manual page 157

CH1 Alert output setting
Set whether to enable or disable the alert output.
For the alert output function, refer to the following.
Page 28 Alert Output Function
Setting value
0
1
If a value other than the above is set, an alert output setting range error (error code: 1B0H) occurs.
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Alert output setting
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9) to enable the setting.
■Default value
The default value is Disable (1) for all channels.
Alert output setting [Q compatible mode]
When the Q compatible mode function is used, set whether to enable or disable the disconnection detection or alert output.
The following shows the setting details in the Q compatible mode.
b15 b14 b13 b12 b11 b10 b9
0 0 0 0 0 0 0
(2)
(1) 0: Alert output enable, 1: Alert output disable
(2) b4 to b15 of the R60DA4 and b8 to b15 of the R60DAV8 and R60DAI8 are fixed to 0.
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
Disconnection detection/Alert output setting
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9) to enable the setting.
■Default value
The default value is Alert output disable (1) for all channels.
CH1 CH2
508 708
b8 b7 b6 b5 b4 b3 b2
0 CH8 CH7 CH6 CH5 CH4 CH3 CH2
(1)
CH1 CH2
47
Description
Enable
Disable
CH3 CH4 CH5
908 1108 1308
b1 b0
CH1
CH3 CH4 CH5
CH6 CH7 CH8
1508 1708 1908
CH6 CH7 CH8
APPENDICES
Appendix 3 Buffer Memory
A
155