5.6.5.2
Installing on the S7-300 standard rail
Follow the steps below to mount the RF290R reader on a vertical S7-300 standard rail:
1. Place the device on the upper edge of the S7-300 standard rail (position A).
2. Screw the device to the rail with the supplied screws (position B).
Figure 5-16
5.6.5.3
Installation on a DIN rail
The RF290R reader is suitable for installation on 35 mm rails that comply with DIN EN
50022.
Note
The adapter for mounting on a DIN rail does not ship with the RF290R
The adapter for mounting on a DIN rail does not ship with the product. You can obtain a pack
of three with the following order number: 6GK5798-8ML00-0AB3.
The mounting fittings consist of the following parts:
• 1 DIN rail slider
• 1 spring
• 2 screws
SIMATIC RF200
System Manual, 09/2013, J31069-D0227-U001-A8-7618
Installing the RF290R reader on the S7-300 standard rail
Readers
5.6 SIMATIC RF290R
111