Siemens SIMATIC Ident System Manual page 251

NOTICE
Area of application of the wide-range power supply unit
The wide-range power supply unit may only be used for SIMATIC products in the
specifically described area of application and for the documented purpose.
If the wide-range power supply unit for SIMATIC RF systems is used for an end product
other than one from the SIMATIC RF family, the following must be taken into account:
● The electric strength test of the end product is to be based upon a maximum working
● The following secondary output circuits are SELV (low voltage; SELV = Safety Extra Low
● The following secondary output circuits are at non-hazardous energy levels: all
● The power supply terminals and/or connectors are suitable for field wiring if terminals are
● The maximum investigated branch circuit rating is: 20 A
● The investigated pollution degree is: 2
Liability
If the wide-range power supply unit for SIMATIC RF systems is connected to an end
product other than one from the SIMATIC RF family, the end user is responsible and liable
for operation of the system or end product that includes the wide-range power supply unit
for SIMATIC RF systems.
NOTICE
Restriction to the approval of the wide-range power supply
The SIMATIC RF290R reader may only be operated with power supplies that have
received KETI approval. There is currently no KETI approval for the wide-range power
supply (6GT2898-0AAx0), which is why it may not be operated in South Korea.
To be able to operate the SIMATIC RF290 reader in South Korea, use only a power unit
that meets the following requirements: 230 VAC, 24 VDC / 3 A; KC safety approved
SIMATIC RF200
System Manual, 09/2013, J31069-D0227-U001-A8-7618
voltage of: Transition from primary to SELV: 353 VDC, 620 Vpk
Voltage): all
provided.
WARNING
8.3 Wide-range power supply unit for SIMATIC RF systems
Accessories
251