Siemens SIMATIC Ident System Manual page 266

Appendix
A.2 Connecting cable
Connecting cable with angled connector
Figure A-2
The angled connector has a height of h = 29 mm and a length of l = 38 mm. Remember that
due to the construction, the distance between the edge of the connector and the edge of the
reader housing is higher.
The distance between the edge of the connector and the edge of the housing is as follows:
RF210R/RF220R = 33 mm, RF240R/RF260R = 36 mm and RF290R = 37 mm.
Table A- 2
Length L
2 m
266
Connecting cable between ASM 456, RF160C, RF170C, RF180C and RF2xxR reader
(RS-422) with angled connector
Ordering data
Order number
6GT2891-4JH20
System Manual, 09/2013, J31069-D0227-U001-A8-7618
SIMATIC RF200