Note On The Use Of The Rf290R As A Replacement For Slg D10 / Slg D10S - Siemens SIMATIC Ident System Manual

Hide thumbs Also See for SIMATIC Ident:
Table of Contents

Advertisement

Le présent appareil est conforme aux CNR d`Industrie Canada applicables aux appareils
radio exempts de licence. L`exploitation est autorisée aux deux conditions suivantes :
(1) L`appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l`appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d`en compromettre le fonctionnement.
If the antenna is detachable, require the following two conditions:
(1) To reduce potential radio interference to other users, the antenna type should be chosen
that the radiated power is not more than that permitted for successful communication.
(2) This device has been designed to operate with the antennas listed below. Antennas not
included in this list are strictly prohibited for use with this device. The required antenna
impedance is 50 Ω.
Si l'antenne est amovible, demandez les deux conditions suivantes :
(1) Afin de réduire le risque d'interférence aux autres utilisateurs, il faut choisir le type
d'antenne et son gain de façon à ce que la puissance rayonnée ne soit pas supérieure au
niveau requis pour l'obtention d'une communication satisfaisante.
(2) Ce dispositif a été conçu pour fonctionner avec les antennes énumérées ci-dessous. Les
antennes non incluses dans cette liste sont strictement interdites pour l'exploitation de ce
dispositif. L'impédance d'antenne requise est 50 Ω.
5.6.8

Note on the use of the RF290R as a replacement for SLG D10 / SLG D10S

The RF290R reader is the successor to the MOBY D readers SLG D10 / SLG D10S
rounding off the RF200 family; it is operated with external antennas. The following features
distinguish the RF290R from the SLG models:
Table 5- 5
Properties SLG D10/SLG D10S
Two devices with different interfaces
M 12, 4-pin male connector for the power supply
9-pin D-sub male connector for connection to the
various communications modules
no digital I/O
no operating display via LEDs
Maximum transmit power of 10 W
One securing option
Standard protocol in ISO host mode (in PC
mode)
Amplitude Shift Keying (ASK) and Frequency
Shift Keying (FSK) modes possible
SIMATIC RF200
System Manual, 09/2013, J31069-D0227-U001-A8-7618
Differences between the RF290R readers and SLG D10 / SLG D10S
Properties RF290R
RS-232/RS-422 interface and PC/CM
functionality in one device
M12, 8-pin male connector for the power supply
and for direct connection to the various
communications modules
M12, 4-pin female connector for digital I/O (can
only be used in PC mode)
operating display by four LEDs
Maximum transmit power of 5 W
Different securing options
Advanced protocol in ISO host mode (in PC
mode)
2)
Amplitude Shift Keying (ASK) mode possible
Readers
5.6 SIMATIC RF290R
1)
115

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic rf200

Table of Contents