RF200 system planning
4.4 Further information
4.3.5.3
Installation options with the antenna multiplexer (2-6 antennas)
You can operate up to six antennas on one reader via the multiplexer.
The data is processed sequentially.
Antenna switchover is performed in time-multiplex mode, so by connecting several antennas
together, the processing time / activation time per antenna is lengthened accordingly.
Figure 4-20
4.4
Further information
Further information on "Fundamentals of application planning" and "EMC" can be found in
RF300 system manual (http://support.automation.siemens.com/WW/view/en/18722182).
74
Configuration example of the antenna multiplexer with ANT D5
System Manual, 09/2013, J31069-D0227-U001-A8-7618
SIMATIC RF200