Toshiba ACE-tronics G9 ASD Installation And Operation Manual page 232

F957
Input Function Target 3
Program  My Function  My Function Unit 7
This parameter plays a role in the setup of the My Function feature by
selecting the functionality of the programmable Input Function Target 3
terminal.
This setting assigns the function of the programmable Input Function Target 3
terminal to any one of the user-selectable functions listed in
Table 10 on pg. 242, or Table 12 on pg.
See F977 for additional information on this parameter.
Output Function Assigned
Program  My Function  My Function Unit 7
This parameter plays a role in the setup of the My Function feature by
selecting the functionality of the Output Function Assigned terminal.
This setting assigns the function of the programmable Output Function
Assigned data location to one of the functions listed in the Input Setting field
of Table 10 on pg. 242.
Settings:
0 – 3099
See F977 for additional information on this parameter.
Analog Input Function Target 11
Program  My Function  My Function Analog
This parameter plays a role in the setup of the My Function feature by
selecting the functionality of the programmable Analog Input Function Target
11 terminal.
The function selected at F961
signal selected here.
Settings:
Disabled (None)
V/I
RR
RX
Optional RX2+, RX2-
Optional V/I
222
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Table 9 on pg.
245.
may be adjusted using the input analog control
Direct Access Number — F957
Parameter Type — Selection List
Factory Default — 0 (Disabled)
Changeable During Run — Yes
241,
Direct Access Number — F958
Parameter Type — Selection List
Factory Default — 0 (Disabled)
Changeable During Run — Yes
Direct Access Number — F959
Parameter Type — Selection List
Factory Default — 0 (Disabled)
Changeable During Run — Yes
ACE-tronics G9 ASD Installation and Operation Manual
F959