Electra Elite
System Hardware Manual
3.2
Removing the KSU Cover
The front cover must be removed to access the battery, cables,
and ETU slots.
1.
Loosen the screws near the bottom of the KSU. Do not
remove screws from the unit.
2.
Pull the front cover off toward you.
Figure 4-4 Removing the Cover of the KSU
3.3
Securing Cables Using the Velcro Strap
When attaching the amphenol cables to the side of the KSU, they
can be secured using the provided velcro strap. This should be
done prior to attaching the KSU to the wall mount bracket. Thread
the velcro strap through the hook on the back side of the KSU.
Issue 6
4 - 11