Table of Contents
Advertisement
Electra Elite
System Hardware Manual
1.
Cut off the plug on one end of the cable.
2.
Locate the adapter terminals on the right side of the
unit as illustrated in
3.
Remove the cap on the adapter terminal to expose
the metal receptacle. Push the cable in the
applicable receptacle, and replace the cap. Line up
the slot on the cap with the slot on the metal
receptacle to ensure proper contact. Refer to
7-13 Attaching Cables to the ADA-U
Figure 7-13 Attaching Cables to the ADA-U Unit
4.
Insulate the end of the cable that needs to be
shielded with insulating tape.
Table 7-1 ADA-U Cable Connections
of cable connections to ADA-U ADP terminals and
describes the specifications for the terminals.
Figure 7-12 ADA-U
Unit.
Unit.
provides a list
Issue 6
Figure
7 - 9
Advertisement
Table of Contents
