Electra Elite
System Hardware Manual
5.
Assemble the base plate and base cover.
6.
As illustrated in
Plate to the
Wall, attach the base plate and base
cover assembly (wide end down) to the posts on the
locally provided and installed wall plate. Place
locally provided screws in the nodes on the base
plate and secure the assembly to the wall.
Posts
Figure 7-52 Attaching the Base Plate to the Wall
When using a modular jack instead of a wall plate,
put the modular jack inside the base unit as shown
in
Figure 7-53 Wall Mounting Using a Modular
Use the locally provided screws to attach the base
unit directly to the wall.
Figure 7-53 Wall Mounting Using a Modular Jack
Figure 7-52 Attaching the Base
Nodes
Issue 6
Nodes
Jack.
7 - 41