Rack Mounting The Ksu; Figure 4-10 Rak-U10 Unit And Ksu; Figure 4-11 Mounting Ksu On The Rak-U10 Unit - NEC ElectraElite 48 System Hardware Manual

Electra Elite
System Hardware Manual
3.5

Rack Mounting the KSU

1. Mount the RAK-U10 Unit to the equipment rack using the six
provided screws. Refer to
KSU. Use three screws on each side (at 1, 2, and 3).
2. Install two provided screws into the upper holes (at D) on the
RAK-U10 Unit. Refer to
RAK-U10

Figure 4-11 Mounting KSU on the RAK-U10 Unit

3. Hang the two metal KSU tabs on the screws just installed.
Figure 4-10 RAK-U10 Unit and

Figure 4-10 RAK-U10 Unit and KSU

Figure 4-11 Mounting KSU on the
Unit. Do not thread screws in the last 1/8 inch.
KSU Tabs
KSU
Issue 6
1
2
3
RAK-U10 Unit
D
D
1
RAK-U10 Unit
4 - 15