Figure 9-2 Connect An Electra Professional Multiline Terminal To The Electra Elite 48 System - NEC ElectraElite 48 System Hardware Manual

Electra Elite
S 4
ECTION
I
NSTALLING
A D
NCILLARY EVICE
A
DAPTER IN THE
M T
ULTILINE ERMINAL
System Hardware Manual
3.2 Attach a Multiline Terminal to the System
1. Plug a telephone cord into the modular jack on the bottom
side of the Multiline Terminal.
2. Lead the cord out through the cord groove as shown in
Figure 9-2 Connect an Electra Professional Multiline Terminal
to the Electra Elite 48
Figure 9-2 Connect an Electra Professional Multiline Terminal
4.1 Ancillary Device Adapter Installation
The ADA(1)-W Unit or the ADA(2)-W Unit can be installed in any
Electra Professional multiline terminal in the system.
1. Unplug the line and headset cords.
2. Turn the multiline terminal upside down and place it on a dry
surface.
3. Remove the knockout shown in
Knockout.
System.
to the Electra Elite 48 System
Issue 6
Figure 9-3 Removing
9 - 3