Table 8-3 Ap(A)-R/Ap(R)-R Unit Switch Settings; Installing Ap(A)-R Or Ap(R)-R Unit On Any Dth/Dtr Multiline Terminal Except Dtr-2Dt-1 - NEC ElectraElite 48 System Hardware Manual

Issue 6
8 - 42
14.3.1 Installing AP(A)-R or AP(R)-R Unit on any DTH/DTR
Multiline Terminal except DTR-2DT-1
1. Prepare Multiline Terminal for adapter installation.
Refer to
Terminal for Adapter
2. Set the SW1, SW3 and DSW switches to default
settings shown in
Switch
over the DSW switch.

Table 8-3 AP(A)-R/AP(R)-R Unit Switch Settings

Switch
SW1-1
SW1-2
SW3–1
SW3–2
DSW
Installing Electra Elite IPK and D
Section 13 Preparing DTH/DTR Multiline
Installation.
Table 8-3 AP(A)-R/AP(R)-R Unit
Settings. Use nippers to remove the cover
Setting/Description
Connect to DTH/DTR (default)
IP Phone-IRT
Sets impedance to 600
modems or facsimile machines (default).
Used for complex impedance devices such as
Single Line Telephones.
Electra Elite
for devices such as
term
Series i Equipment