Figure 7-46 Removing The Screws From The Slt(1)-U( ) Adp; Figure 7-47 Attaching The Slt(1)-U( ) Adp To The Wall - NEC ElectraElite 48 System Hardware Manual

Electra Elite
System Hardware Manual
3.10.2 Wall Mounting the SLT(1)-U( ) ADP
1. Remove the two screws from the top to open the
SLT Adapter as shown in
Screws from the SLT(1)-U( )
Figure 7-46 Removing the Screws from the
2. Using the two provided wood screws, attach the unit
to the wall. Close the unit and secure with the two
screws that were previously removed.
Figure 7-47 Attaching the SLT(1)-U( ) ADP to the
Figure 7-46 Removing the
ADP.
SLT(1)-U( ) ADP
Wall
Issue 6
7 - 37