Electra Elite
System Hardware Manual
3.4.5
Connectors
The MIFA-U( ) ETU has the following connectors:
3.5
MIFM-U( ) ETU
3.5.1
Description
This ETU provides additional memory and processing
power for PC Programming, SMDR, LCR, Caller ID, or
Wireless activation. PC Programming and SMDR are
standard. LCR and Caller ID scrolling and dialing require
the KMM(1.0)U to be mounted on the MIFM-U( ) ETU.
The MIFM-U( ) must be installed in KSU Slot S2.
CN1
Connects to the Backboard
CN2
Connects to the Backboard
CN3
Connects the ETU backup battery
during installation.
Disconnect to store the ETU.
IC6
Not used by Electra Elite 48
Figure 5-10 MIFM-U( ) ETU
Issue 6
5 - 13