Figure 8-25 Sliding The Hook Into Position; Figure 8-26 Removing Cutout; Installing The Base Cover To The Wall - NEC ElectraElite 48 System Hardware Manual

Electra Elite
System Hardware Manual
2. Turn the hook with the tab toward the top.
3. Slide the hook on its glides back down into position forming
the hanger hook for the handset.

11.2 Installing the Base Cover to the Wall

1. Raise and remove the Base Cover.
Removing or Installing the Base
2. Remove cutout shown in
nippers.

Figure 8-25 Sliding the Hook into Position

Cover.

Figure 8-26 Removing Cutout

Figure 8-26 Removing Cutout
Issue 6
Refer to Section 9
with
8 - 21