Issue 6
8 - 32
3.
The Plug Puller shown in
hollow cylindrical sleeve with a post and a circular
rim on the base. The plug of the adapter is inserted
in this hole, and the sleeve is pulled over the back of
the plug to seat the post that can then be used to
unplug the adapter.
4.
Locate the plug on the ancillary device that is
connected to the bottom of the Multiline Terminal
and plug in the AC Adapter.
Figure 8-41 AC-R Unit Connection to Adapter
Installing Electra Elite IPK and D
Electra Elite
Figure 8-40 AC-R Unit
term
Series i Equipment
is a