Issue 6
7 - 18
4.
Close the base plate, lead the AC adapter cord out
through the hole, and snap the cover in place.
5.
Install a ferrite core (provided with the APR-U Unit)
by looping line cord through the core between the
terminal (1 inch from the terminal) and ESI(8)-U10
ETU. This core is only used with the APR-U Unit.
6.
Plug in the power cord on the AC adapter and the
telephone cord in the jack.
3.4.2
Switch Settings
The APR-U Unit has two switches.
Figure 7-22 Closing the Base Plate Cover
Figure 7-23 APR-U Unit Switches
Installing Optional Equipment
Electra Elite