Dismounting The Handlebar Pole Housing - GE eBike III basic Series Service Manual

d H
IsMountIng tHe andleBar pole HousIng
1. Remove the two plastic caps (type 0) on both sides of
the handlebar pole housing
2. Using a small screwdriver, cut into the plastic caps
covering the screws and remove the caps
(the caps will later be replaced by spare ones;
P/N 2018111-335).
3. Remove the screws with an allen key tool.
4. The two parts of the handlebar pole housing can be
carefully removed.
5. Follow the steps in reverse order to reassemble the
handlebar pole housing.
- 40 -
b iii
e ike
eBike III basic / comfort 2018111-336 Rev. B