Contrast - GE eBike III basic Series Service Manual

C
ontrast
The contrast of the LCD can be adjusted between
0 to 100 %.
eCg t
ype
The selected ECG Type determines the communication
method with the ECG recorder, PC-based ECG system, etc.
To prevent settings from being changed in error, the menu
is protected with a password.
Using the arrow keys, enter "003" and confirm the entry by
pressing NIBP.
All eBike III ergometers support the following
communication modes:
• Digital (default)
The communication with the ergo meter is entirely
controlled with digital commands.
• Analog / Digital (optional)
An analog voltage controls the load - blood pressure
measurements can be initiated with digital commands.
To use the "Analog/Digital" communication mode,
the eBike III ergometers have to be equipped with the
optional „COM-Modul (PN 201118-340)".
Select the communication mode and confirm by pressing
NIBP.
- 62 -

Contrast

a
djuSting the diSplay contraSt
ECG Type
e
ntering the
ECG-Type
Digital
Analog / Digital
S
electing the ergometer communication mode
• The ECG Type needs to be selected only when the ergom-
eter is connected to an ECG unit The selection is part of
the installation procedure
eBike III basic / comfort
50 %
003
ekg t
ype paSSword
Note
2018111-336 Rev. B