GE eBike III basic Series Service Manual page 98

e CoM (e
rror Code BIts
Bit Error
0 not used
1 not used
2 not used
3 not used
4 +24V out of range
5 not used
6 not used
7 Safety state mode
8 Setup not ready
9 CAN zykl. Timeout
- 98 -
a
xternal nalog InterfaCe Module
Reaction
Module is switched off
Module is switched off
Module is switched off
eBike III basic / comfort
)
Display / Info
Warning
Internal error
Internal error
Internal error
Troubleshooting
- check mounting of COM
(DSUB connector)
- check jumper on LIU
- check power supply
- check connections:
power supply to LIU
- replace COM
- restart eBike (OFF / ON)
- check mounting of COM
(DSUB connector)
- check jumper on LIU
- if error persists: replace COM
- check mounting of COM
(DSUB connector)
- check jumper on LIU
- restart eBike (OFF / ON)
- if error persists: replace COM
- check mounting of COM
(DSUB connector)
- check jumper on LIU
- restart eBike (OFF / ON)
- if error persists: replace COM
2018111-336 Rev. B