GE eBike III basic Series Service Manual page 58

r C
eMove ontrol unIt
1. To remove the control unit, loosen both Phillips-head
screws on the side of the control terminal.
2. Remove the control terminal from the support.
3. Disconnect the patch cable (1) from the DTU board.
eBike III with blood pressure measurement
• Disconnect microphone cable (2) and cuff hose (3)
(see following instructions and pictures)
- 58 -
The housing of the control unit CANNOT be opened!
•
• For repairs / upgrades the complete control unit has to be
replaced
eBike III basic / comfort
1
Note
2
3
2018111-336 Rev. B