GE eBike III basic Series Service Manual page 44

r
eMove sIdes of tHe HousIng
1. Using a small screwdriver, cut into the plastic caps
(cap type 1) covering the screws and remove the six
caps (3 on each side); the caps will later be replaced by
spare ones (P/N 2018111-335)
(see picture: items "A").
2. Remove the three allen screws in the main side parts
(see picture: items "A") and the two allen screws under
the removed inlays (picture: items "B") on both sides.
3. Unlock the metal bracket connecting both sides covers
of the housing by lifting it with a flat screwdriver.
- 44 -
A
A
eBike III basic / comfort
A
B
B
A
B
B
2018111-336 Rev. B