GE eBike III basic Series Service Manual page 60

s C
oftware ontrol terMInal
t s
urnIng tHe ysteM
The ergometer is powered on by pressing the power switch
to the ON position.
The ergometer runs a self-test. The Self-Test screen is
displayed.
s C t
ettIngs ontrol erMInal
The control unit is controlled remotely by a host device (for
example, CASE, CardioSoft).
No setup is required by the user.
All configuring is done through the service menu only.
- 60 -
o
n
eBike III basic / comfort
eBike III
Selftest running
S -
elf teSt Screen
Note
• Instruct the patient not to pedal while the ergometer is
powering and during the self-test
• Apply the blood pressure cuff to the patient AFTER the
ergometer has been powered on and the self-test com-
pleted
• If an error message appears displays after the self-test,
please refer to the Addendum / Error Messages section
for instruction
2018111-336 Rev. B