GE eBike III basic Series Service Manual page 96

e sMu (s
rror Code BIts
Bit Error
0 Error seat sensor
1 Seat no movement
2 Wrong cabling
3 not used
4 +24V out of range
5 not used
6 not used
7 Safety state mode
8 not used
9 CAN zykl. Timeout
- 96 -
-M pCB)
addle otor
Reaction
Module is switched off
Module is switched off
Module is switched off
Module is switched off
Module is switched off
eBike III basic / comfort
Display / Info Troubleshooting
Internal error - check cable sensor <-> SMU
- check cable motor <-> SMU
- if error persists:
check adjustment of saddle tube
replace seat motor
Internal error - check cable sensor <-> SMU
- check cable motor <-> SMU
- if error persists:
replace seat motor
Internal error - check cable sensor <-> SMU
- check cable motor <-> SMU
- replace cables
Warning - check power supply
- check connections:
power supply to LIU
- replace SMU
Internal error - restart eBike (OFF / ON)
- if error persists:
replace SMU
Internal error - restart eBike (OFF / ON)
- if error persists:
check cable DTU <-> LIU
check connection LIU<-> SMU
- replace SMU
2018111-336 Rev. B