GE eBike III basic Series Service Manual page 79

The service menu displays.
Select "Software update" with the arrow keys and confirm
by pressing NIBP.
The current version of software installed is displayed.
Select "Show Software Rev." and confirm by pressing NIBP
to display the installed software versions of the different
electronic modules.
Grp: name of the module
Ap-SW: current installed version
(if =0 no connection to module)
X: XCUT of software-version (always 0)
S-No.: serial number of PCB, if electronically available)
Press the NIBP key again to display the installed bootloader
versions of the different electronic modules.
Grp: name of the module
Op-SW: required software version
(has to be equal to the Ap-SW in previous display)
BootLo: actual bootloader version of PCB
Press NIBP to exit the version display.
1. Start the software update by selecting „Update" and
confirm by pressing NIBP.
2018111-336 Rev. B
Contrast
ECG type
NIBP mmHg / kPa
NIBP Beep
Baudrate 8N2
Analog Calibration
Software update
S
election of parameterS in Service menu
Software Update
GF 1.0
UPDATE
Show Software Rev.
EXIT
Grp
DTU
LIU
SMU
Grp:
DTU
LIU
SMU
EXIT
Software Update
GF 1.0
UPDATE
Show Software Rev.
EXIT
eBike III basic / comfort
Service Menu
Ap-SW X
1.0 0
1.0 0
1.0 0
Op-SW: BootLo:
1.0 0.1
1.0 0.1
1.0 0.1
S-No.
910
117
17
- 79 -