GE eBike III basic Series Service Manual page 80

2. Start the PC- update program by double-clicking
ergoselect.exe .
3. Adjust the serial (or virtual) COM-Port used for the
connection with the ergometer.
4. Click CONNECT to establish the software connection.
As soon as the connection is established, the START button
becomes active (or an error message displays).
Initiate the update by pressing „START".
The update progress is displayed on the ergometer LCD
and on the PC.
After the update is performed, the ergometer has to be
powered off and on again.
- 80 -
Software Update
is running
DTU FLASH writing 12 %
S
oftware
Software Update
Update finished
Switch off power
S
oftware
eBike III basic / comfort
u
pdate in progreSS
u
pdate finiShed
2018111-336 Rev. B