GE AxiChrom 50 Operating Instructions Manual page 58

4 Getting started
4.9 Installation in basic configuration
Installation to ÄKTApilot
For details about tubing, see section Tubing used between column and system, on page 60.
Figure 4.9: Basic configuration for connecting AxiChrom columns to ÄKTApilot system.
Position 3 is connected to the mobile phase, and position 1 to the hydraulic chamber.
Installation to ÄKTA avant 150
Connect the column to the system as described in the illustration in the Intelligent
Packing phase and according to those column valves chosen in the method, see step
6 in section Creating an Intelligent Packing method using GE approved media, on page 84.
For details about tubing, see section Tubing used between column and system, on page 60.
Note:
58
Valve 7
1 3 4
Valve 6
1 3 4
Use a T-connection on the outlet tubing.
AxiChrom 50, 70 and 100 columns Operating instructions 28-9331-08 AG