Remove the DC link cover
8.3
Connecting the DC link busbars and 24 V busbars
The following steps are necessary to connect a component to the DC link and the 24 V
busbars of the S120 Combi:
1. Open the protective cover of the components to be connected using a suitable tool
2. Remove the DC link side cover at the connection location
SINAMICS S120 Combi
Manual, Edition 05.2010, 6SL3097-4AV00-0BP0
(completion kit provided with the components to be connected)
Figure 8-1
S120 Combi and Motor Module without DC link covers
Electrically connecting Motor Modules and DC link components
8.3 Connecting the DC link busbars and 24 V busbars
Remove the DC link side cover
171